Engineering Guides

Construction Estimating Resources

Practical guides on electrical load calculation, BOQ preparation, solar system sizing, plumbing pipe design, FDAS fire systems, structural takeoffs, and more — written for engineers and construction professionals.

8Guides
8Disciplines
FreeAlways
⚡
Electrical8 min read
How to Calculate Electrical Load for a Residential Building

A step-by-step guide to computing connected load, demand load, cable sizing, and panel schedule for a residential construction project.

→
📋
Estimating6 min read
Understanding Bill of Quantities (BOQ) in Construction

What a BOQ is, why it matters for bidding and procurement, and how to structure one correctly for any engineering discipline.

→
☀️
Solar10 min read
Solar PV System Sizing: From Load Analysis to Panel Count

A practical guide to sizing a grid-tied or off-grid solar system — from daily energy consumption through panel count, inverter kW, and battery bank sizing.

→
🚿
Plumbing7 min read
Plumbing Pipe Sizing Using Hunter's Method

How to determine water supply pipe sizes for any building using the Water Supply Fixture Unit (WSFU) method developed by Roy B. Hunter.

→
🔥
Fire Protection9 min read
FDAS Fire Detection System Design per NFPA 72 and RA 9514

A practical guide to designing a Fire Detection and Alarm System (FDAS) for residential, commercial, and industrial buildings — covering detector spacing, FACP sizing, and BOM computation.

→
🏗️
Structural8 min read
Structural Concrete Estimation: Volume, Rebar, and Formwork Takeoff

How to compute concrete volume, RSB rebar quantities, and formwork area for slabs, beams, columns, and footings in a building construction project.

→
🚧
Civil7 min read
Civil Earthworks: Cut and Fill Volume Calculation for Construction Sites

How to compute cut and fill volumes using the average end area method, apply swell and compaction factors, and prepare an earthworks BOQ for excavation and grading.

→
📑
Bidding8 min read
How to Prepare a Construction Bid Summary and Formal Quotation

A step-by-step guide to assembling a complete construction bid — from direct costs through subcontractors, overhead, contingency, profit, VAT, and a client-ready PDF quotation.

→

Apply these methods automatically

EngEst Pro handles all the calculations in these guides. Create your free account and run your first estimate in under 10 minutes. No credit card required.

Get Started Free →